Install Safety/Accessibility Products
Installation of Safety Stair Nosings
Grip Guard has a comprehensive range of safety stair nosings for any stair type for both Internal and external stairs with ratings from P3-P5 to ensure safety and compliance to BCA and NCC regulations.
Installation of Carborundum Modified Gal Steel Safety Plates
Carborundum modified safety plates can be used on ramps, stair treads, walkways and other areas that require a P5 slip resistance. Grip Guard distributors are able to assist property owners to choose the correct grade (slip resistance), colour (to meet luminance requirements) and width. All safety plates are made to measure and can be installed with little or no disruption to business.
Installation of Tactile Safety Products for the Visually Impaired
To ensure equal access to public buildings for those with disabilities, the DDA requires that all buildings have tactiles (tactile ground surface indicators) to allow safe and easy travel for the visual impaired. Grip Guard supplies and installs tactiles to Australian Standards.
Installation of Marine Grade Safety Flooring for Ramps and Walkways
Because inclined surfaces require a higher degree of slip resistance, it is important to ensure that the correct pedestrian surface is installed. Marine grade safety flooring is manufactured diamond-shaped nodules that have a P5 slip resistance and channel water away from the foot to avoid aquaplaning.
Installation of Braille Signs for the Visually Impaired
To ensure equal access to public buildings for those with disabilities, the DDA requires that all buildings have braille signage to allow the visual impaired to navigate through buildings and find essential services. Grip Guard distributors supply and install braille signate to Australian Standards.
Installation of Grip Guard Non-Slip Tapes
An easy and cost efficient solution for slippery areas, Grip Guard distributors can install non-slip tapes to increase the slip resistance of ramps, stair edges, shower bases and other areas of concern.
Treating Ramps to reduce slipperiness
To retain the aesthetic of the surface of timber, tiled or other expensive surfaces used in the construction of ramps, DuraGrip Plus PU anti-slip sealer will cause little or no change to the appearance of the ramp yet still increase slip resistance to P3 (for internal ramps) or P5 (for external ramps).
Installation of Entrance Matting
Entrance matting is designed to remove as much moisture as possible from pedestrian’s feet to reduce the risk of slips and falls once the pedestrian reaches a hard floor surface. Grip Guard distributors provide free measures and quotes, as well as installation of entrance matting.
